Alfa laval-1 pump mechanical seals replace Vulcan type 92B

Operating range:

Structure: Single End

Pressure: Medium Pressure Mechanical Seals

Speed: General Speed Mechanical Seal

Temperature: General Temperature Mechanical Seal

Performance: Wear

Standard: Enterprise Standard

Suit for ALFA LAVAL MR Series PumpsI

Combination materials

Rotary Face        
Silicon carbide (RBSIC)
Carbon graphite resin impregnated
Stationary Seat
Silicon carbide (RBSIC)
Tungsten carbide
Auxiliary Seal
Ethylene-Propylene-Diene (EPDM)
Spring
Stainless Steel (SUS304) 
Stainless Steel (SUS316)
Metal Parts
Stainless Steel (SUS304)
Stainless Steel (SUS316)

Shaft size

32mm and 42mm

Spring Mechanical Seal for LKH ALFA-LAVAL Pumps

Structural Features: single end, balanced, dependent direction of rotation, single spring. This component has a compact structure
with good compatibility and easy installation.

Industrial Standards: specifically customized for ALFA-LAVAL pumps.

Scopes of Application: mainly used in ALFA-LAVAL water pumps, this seal can replace AES P07 mechanical seal.

We can supply below replacement of alfa laval mechanical seals

Replacement: AES W13S

Type: suit for alfa laval lkhi, lkhp, lkhsp and lkh100 multi-phase series pumps

Replacement: AES MP07, Vulcan 912, Billi BB13Kit

Type: alpha laval pump seal

Replacement: lidering AL-N-22

Type: suit for alpha laval tri-clover pumps

Replacement: Vulcan 1628, Billi BB93Kit

Type: suit for alpha laval lkpl, nmog and sru lobe pumps

Replacement: Vulcan 1680

Type: suit for alafa laval mog, alp lobe pumps

Replacement: Vulcan 1655, Billi BB55

Type: suit for alpha laval sr lobe rotor pumps

Replacement: Vulcan 1694

Type: suit for alpha laval tri-clover pumps

Replacement: Vulcan 293, Billi BB93

Type: suit for alpha laval c.s.f stainless steel and cs series centrifugal pumps

Replacement: Vulcan 13m, Billi BB5

Type: suit for alpha laval alc-replacement pumps: burgmann g13

Mechanical seals are available

Replacement: suit for alpha laval sr, rotary wolf series wolf pumps

Replacement: suit for alfa laval mog, alp series rotary lobe pumps

Replacement: suit for alpha laval CHT-718 pump

Description

Alfa laval-1 pump mechanical seals replace Vulcan type 92B is a drop-in replacement unit for Alfa Laval pumps, matched on shaft size and working height. Most units go into building services and HVAC plant. Bore and shaft tolerances follow the original part, so no adaptor is needed.

The working element is a spring-loaded pusher assembly. Standard build pairs tungsten carbide with silicon carbide faces and EPDM O-rings.

Exact limits follow the face material and elastomer choice; confirm the duty point against the datasheet for the specific build. Running the pump dry, even briefly, will damage the faces.

Fitting follows the standard procedure: measure shaft diameter, chamber depth and working height, then set the seal to the recorded dimension before the pump is reassembled. Wear normally appears first at the faces, then at the secondary seals; a leaking unit usually shows both by the time it is pulled.

EPDM covers water and dilute chemical service but not mineral oils; FKM handles oils, fuels and many solvents; FFKM is reserved for aggressive media where the softer elastomers swell. Fitting a complete replacement keeps the face load and working height as they left the factory, rather than rebuilding the stack on site. Keeping one unit on the shelf cuts the downtime that follows a leak, since the pump does not have to wait for a part to arrive.

Send the nameplate data with the model and shaft size, and the unit is checked against the original drawing. The unit belongs to the OEM mechanical seals manufacturer line. For a different shaft size, see Alfa Laval-5 Laval pump seals replace Vulcan Type 93 or Alfa Laval-2 OEM pump mechanical seals replacement of Vulcan Type 92. Include the quantity and the required elastomer option with the enquiry.